batman fidget spinner toy
by heraldomedeiros, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
fidget spinner toy shaped like the batman's logo.
78mm diameter, 7mm high.
- three 608 ball bearings (22mm)
- one 608 ball bearing (22mm) and two holes for coins (each hole will fit three 5 cents brazillian Real coins, which are fortunately 22mm in diameter)
- low profile, 23mm in diameter, covering the bearings completely
- high profile, 19mm in diameter, which will fit standard playstation/xbox rubber joystick caps
- simple cap for the coin's holes
no supports needed
4-lines thick walls
The holes for the bearings are 22.5mm in diameter. If you want a tight fit for the bearings, downsize the model to about 98% in your slicer.
Please, share it if you print it!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
batman fidget spinner toy by heraldomedeiros is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving heraldomedeiros a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure heraldomedeiros would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).