Sans Mask Devided (4-6 parts)
by Komb, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My Son wanted a Sans Mask and I liked Mizunoslove's design, but it wouldn't fit my printer...
Also it looked uncomfortable, as there is nowhere for the wearer's nose to go.
So, I cut out a void for a person's nose to fit. Then I sliced the original file into 4 pieces.
Thinking they would print smoother standing up, I rotated them.
Although the Top files would fit my WallaceG1 printer, they were too tall for my ecksbot. So, I re-sliced them to fit most 200mm bed printers.
I Printed in ABS, but PLA might work with less warping. Although glueing and possible sanding PLA may be tricky...
Print Bottom Left and Bottom Right.
If you have a tall enough printer (>140mm) then print Top Left and Top Right.
Everyone else prints Top Left 1 & 2 and Top Right 1 & 2.
Now glue all the sections together. Some sanding may be needed. As I printed in ABS, I used Acetone on the edges to glue them together.
Step 2 or so...
I used the support pieces, some Acetone and a glass jar to make some ABS paste/slurry.
Step 3 ish
I used a popsicle stick to spread the paste/slurry into the gaps and along some seams.
Let it dry overnight.
I sanded all the glossy and bumpy areas where the ABS paste/slurry was used, until it matched the rest of the surfaces.
Now you might want to paint.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sans Mask Devided (4-6 parts) by Komb is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Komb a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Komb would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).