Mini Laser Engraver Upgrade Parts
by profhankd, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
These are the 3D printed part designs that go with my Instructable, Making Your Mini Laser Engraver Safer And Better. They are designed to be used with any of the SuperCarver-style "Laser Engraver Printer Cutter Carver DIY Engraving Machine" units commonly sold for between $80 and $150, and I have applied them to a 1000mW @ 405nm unit branded HTPOW. See the after and before photos above. Here is a video from the webcam I placed inside the engraver -- it is not sped-up; this is the actual engrave speed.
These machines have the potential to very quickly cause significant harm. I'm not an expert in the law, nor in laser safety; I'm just a maker who sees the potential, both good and bad, of these little engravers. You bear all responsibility for safe configuration and operation of your laser. I'm just describing what I did to my machine in an attempt to reduce the risk and improve functionality.
These parts are easy to print, but material choice is very important. Print them in PLA. Why? PLA behaves much better than most plastics when hit by a laser; especially avoid any chlorinated plastics, but also avoid ABS because the gas produced if it gets hit by the laser is pretty nasty. The color of the material also matters; enclosure parts need to be opaque to the laser light, and the jigs should be made of a color that minimizes scattering of the laser light.
Read my Instructable to understand how these 3D-printed parts are intended to be used; also read other materials so that you can understand the dangers and safely operate your laser. Avoid the temptation to try things first and read instructions after a serious problem has surfaced: I didn't even plug-in my laser's power supply until after I had built an enclosure for the unit.
How I Designed This
These parts were all designed using OpenSCAD. I might post a Customizer version once I'm sure the design will not change for a while -- for example, I'm still looking at alternative methods to make the vent filtering more effective.
Tools & Utilities Apps
Repair, slice, or enhance this Thing
Mini Laser Engraver Upgrade Parts by profhankd is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving profhankd a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure profhankd would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).