by tommyc, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Control panel housing for Mendelmax. With a control panel like this, you can do hostless printing with the Marlin firmware.
Short video demo here:
Tutorial here: http://goo.gl/Lk0i6
If you don't want to source the parts, you can get my panelmax kit here http://ebayitem.com/150886149485
Preassembled panelmax available here
You need the following:
Click Encoder with switch X 1 - something like http://hk.element14.com/alps/ec12e2424407/encoder-vertical-24-det-24ppr-sw/dp/1520813
20x4 LCD display module X 1 - form ebay
Push button X 1 (reset button)
SD Card Reader X 1 - I use this one http://www.dfrobot.com/index.php?route=product/product&product_id=163
The Knob is form here http://www.thingiverse.com/thing:17404 I just chop off the lower half to fit the panel.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
PanelMax by tommyc is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tommyc a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tommyc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).