Routerized Cupcake CNC Body Panels

by pandelume, published

Routerized Cupcake CNC Body Panels by pandelume Feb 18, 2010



Routerized Cupcake CNC Body Panels by pandelume is licensed under the GNU - GPL license.

Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag


Thing Statistics

5447Views 2494Downloads


Body DXFs of the cupcake modified for cutting on a CNC router with a 3mm (or maybe a 1/8") bit. I also resized the slots for 5.2mm thick plywood, since that's what seems to be available at hardware stores around here.

I haven't tried these yet, but I will as soon as my friend with the CNC router finds the time.

Related things:
Routerized Cupcake X stage: http://www.thingiverse.com/thing:1881
Routerized Cupcake Y and Z stages: http://www.thingiverse.com/thing:1882


1) Cut with 3mm bit on CNC router
2) Assemble

All Apps

Upgrade this Thing with Thingiverse Apps

No results.

awesome! I was --
lt;--- close to doing this myself...glad I procrastinated and found this!

I'll try it tomorrow. Thanks! :)

Sweet I will Give it a try. Thanks

Awesome, I was going to do this once I got around to building my CNC router (Still totally in the planning stages!)... :P Too sweet.

I was thinking about the m3 nuts cant you just replace the blot+nut with some wood screw

It might work, but for the edges I'd be concerned with causing the fairly thin plywood panels to delaminate where you put the screws in. Maybe if you put a pilot hole into the edge of the panel, but then you'd have to a bunch of extra work after cutting. For the thru holes I suppose you could - but again the ply is pretty thin, so you'd either have tiny screws with little holding power or big screws with minimal thread engagement.