This is a modification to the Air 2 - Jordan to allow for 1/8th (11 gage) steel to be cut. I've cut off all the side tabs and adjusted the holes accordingly (I hope..hehe). The two bottom bracket holes on the side plates were replaced with actual circles as it looked like they were hand drawn in.
I plan on having my unit plated or powder coated depending how the cuts turn out and how tight the fit is. In turn, the structure can now be tack welded together for a super strong/riged frame.
Bill of materials would be the same as the Air 2. The drawings have been modified to work with 1/8th (11 gage) steel.