3DPrint this front spoiler in rubberlike material and get a more crash safe OpenR/C Formula 1 car - Check out the car designed by Daniel Noreé here http://www.thingiverse.com/thing:1193309
Even printed in PLA etc it will be stronger than the original.
PLEASE RESPECT THE LICENSE AND GIVE CREDIT TO THE DESIGNER
In the pic I have used PI-ETPU 95-250 Carbon Black ( http://rubber3dprinting.com/ ).
Please also check out my unique UV-stable, flexible and conductive filament called ETPU 95-250 Carbon Black filament.
Don´t need the conductivity? Well the conductivity is great for some things but perhaps not your first choice? Then consider this:
This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:
•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•It´s not too stretchy and will do great for timing belts etc.
Follow me on Instagram and/or twitter:
For more info regarding release of the F1 car and also the other Open-RC project head over in this direction: http://danielnoree.com/
For OpenR/C Formula 1 print-files (after release) go here: https://pinshape.com/users/18846-danielnoree
For my designs check out http://www.thingiverse.com/Palmiga/designs & https://www.instagram.com/rubber3dprinting/
Due to the nature of 3D printing / material used etc... Keep in mind that you use my designs on your own risk and that I in no way is responsible for any damage och injuries.