Cube 2 E3Dv6 mount (bowden)
by spegelius, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A mount for E3Dv6 and clones, for 3DSystems Cube 2 printer. Bowden type.
I use this as fan tunnel: http://www.thingiverse.com/thing:217253. The connector part is also in this thing
Update: uploaded properly exported stl
0.2 - 0.3mm
30% or more
I used PETG but PLA should work too. Actually PLA might be better as it's more rigid.
It is assumed that the original Cube 2 extruder tingamajig is stripped from the arm, some kind of extruder is present and proper wiring is done. Info about those things: http://cube3d.createaforum.com/general-discussion/frankencube-v0-1-its-alive!!!/
I used 2.5mm drill bit to clear the bolt holes and then assembled with two M3 bolts (30mm if I remember correctly). Two short M3 bolts hold the frame in X arm.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Cube 2 E3Dv6 mount (bowden) by spegelius is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving spegelius a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure spegelius would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).