Filament spool clip
by TimeFramed, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a remix that fits my particular filament spools better (from MakerFarm.com).
I have printed and am using the 3mm version. I don't have any 1.75mm filament, but I made a 1.75mm version; I believe I scaled down the retaining slot appropriately to work with 1.75 filament.
The original worked best when put on the ridge of the spool side (see photo of white clip); otherwise it didn't put enough pressure on the filament.
This version has a longer outside arm with a larger bend; it slips over the first ridge on the spool. It's also slightly wider to accommodate my slightly thicker spool side.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Filament spool clip by TimeFramed is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving TimeFramed a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TimeFramed would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).