UPDATE Nov.,17th 2016:
- added a stackable version (won't print without supports though!)
Wooden train track element - can be used as a bridge or stacked on top of Brio's original stacking train support (
will not serve as a support itself due to minor design differences).
You'll need two sides and one track for a functioning element obviously.
The track element comes in two flavours:
Use a 3mm drill to clean out the holes in the side elements. Do NOT drill into the screw holes in the track element!
Use M3x15 (or shorter) screws to attach the two side elements to the track element.
My girlfriend kept nagging me about how I should put my printer to good use and my son wanted some track elements to play with, so I had no choice... ;)
Designed with a caliper rule and Autodesk Fusion 360 (first real project actually) ...aaaaand lots of love!