Power Supply cover, Power Switch, Power cord socket for the newer model Anet A8, Hesine, Senhai, M505, Omni etc printers. This cover will work with the uxcell S-250-12 20 Amp PSU linked below. I only have access to the Anet A8 so I am not sure if other manufacturers have switched out power supplies with the same wider one Anet is using. I am also not sure if the Anet A2, or A6 use the same one as the A8.
This cover is designed to use a switched and fused IEC 320 C14 similar to the one linked below, which can be found for around $1 off of Ebay if you're fine with a longer shipping time.
No support material is needed and can be mounted securely with a single m3 screw on the right side of the PSU, though some hot glue can easilly be added if needed.
Update #1 (11/20/2016)
A new model with the correct screw hole location for newer Anet printers has replaced the old file with the incorrect hole location. If this location is incorrect for your printer, or the width is incorrect please message me and I'll work with you to get a new working model up. I have also uploaded another model with a thinner clipping area for the switch/plug combo unit I have linked to on Amazon, as well as a wiring diagram for said switch. If you have any problems feel free to message me/comment and I'll reply as soon as I can.