PS4 Controller Wall Mount- Bracket
by macrae27, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
So after I made my turtle beach wall mount. I was thinking some of you might liked the PS4 controller mount. So I ve knocked up this design just printing it on one of my printers will upload a pick when finished.
Recommend two 3.5mm x 35m wall screws with Raw plugs. Made this mount thicker than the Turtle beach one and added strengthens into the corners. Also it has an angle away from the wall to make room for the hand grips of the controller
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
PS4 Controller Wall Mount- Bracket by macrae27 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving macrae27 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure macrae27 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).