Update Jan 14th 2016
Added a pod which includes the whip option along with a side port option where you can mount an extension cable and bend the external antenna down. I've also extended the port to accommodate most flight controllers.
Update Jan 12th 2016
Moved port towards the rear for DTFC and other FC (new file)
Created a file which uses a fin from http://www.thingiverse.com/thing:1751669 for a whip antenna.
Update December 11th 2016
Added larger hole for USB Port.
Larger hole for power wires.
Update November 27th 2016
Added a GoPro Session Mount that connects with 2 zip-ties going though the camera mount above.
Added less camera angle feature
Adjusted design for 5" prop clearance (tested with RaceKraft 5040 tri)
Adjusted height so the camera doesn't hit the bottom plate.
Added programming port for Kombini, height of the FC adjusted by fuel tubing.
Added a hole above the FC for an optical transponder. Receiver sits on the board and transponder sits on receiver.
Adjusted camera hole to allow larger lenses and greater camera angle without blocked vision. 2.5mm lens tested.