This is a set of components for a modular model paint holder. This was designed primarily for 26mm bottles (Army Painter, Model Color, Etc). The shelf itself is 1/4" MDF from a home supply store (roughly 6mm thickness). The shelf pieces are 40mm x 562mm, and the step height between shelves is 28mm. These dimensions are up to you, since the components and other accessories are modular (136mm wide).
Parts included are:
- 4 bottle holder (136mm)
- 3 bottle holder (102mm) (3 bottle holder allows for an offset on every other shelf)
- Brush holder (136mm)
- Card holder (136mm)
The card holder makes for a convenient spot to hold a card that represents the miniature being painted. Replace these with extra paint bottle holders if not needed.
Glue the pieces together with cyanoacrylate, and clip into place on the MDF shelf. See attached sketchup drawing and photos for assembly hints.
Note: The STL orientation is that of the final the assembled version. Parts with an overhang should be flipped upside down when printing to avoid the overhang. No supports should be required if the parts are oriented appropriately.