Loading

Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Frankenrap

by pedros, published

Frankenrap by pedros Mar 28, 2012

Contents

License

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

2130Views 502Downloads

Summary

This is the 3D printer that I am building which is currently mostly made from steel square section and angle held together with almost acceptable welding. I did a couple of calibration boxes for a first fix test with varying degrees of success and then went for a 30% size owl by cushwa. The result was not bad considering the state of build and lack of proper upper slide bearings.

thingiverse.com/derivative:24195

Anyway, I now need to pull it apart to make some adjustments (a bit more welding drilling and file work and bashing) then add a heated bed.

All Apps

Upgrade this Thing with Thingiverse Apps


No results.

What hot end did you use for this project?

What hotend did you use for this?

Hi, I got mine from ParCan http://www.emakershop.com/Seller=59http://www.emakershop.com/Sell...

It's a MK2 version and seems to work quite well although I have only run it for about 4 hours in total.

Top