5/1/17 - Added module for CP2102 USB to serial adapter and dual USB connector extension. The USB socket is connected - #1 to Raspberry Pi free USB port and #2 to CP2102 which will be connected via USB cable to my EFIS RS232. All connection were soldered. The antenna is direct plug to RTL Nano. Holes for antennas are shape different with matching cable end for easy identification.
1/15/17 - Added some modules for newer Nano 2+ which is little bit longer.
12/25/16 - Added some more modules for different adapters and positions, side mount for holding 2 mini antennas (you need to print updated top with side holes) front or back (reversed) load, added full face GPS plug with thin wall recess for easy cable cutout.
This is a somehow modified Slim Case by helno - SD card opening is cut deeper for easy removal, more vent holes. The modules can be design to fit a different components mounted to Raspberry Pi - GPS, AHRS etc.
Hardware is 2-56 screws and brass inserts for plastic -