Customize your own part bin whether its for that load of loose screws you keep around 'just in case' or tiny electronic components they will no longer go missing. This box is made for the ultimate plastic scrimper and all the walls can be paper thin as the box will still be supported by columns (however I would still recommend 2 layers). Easy to print with no overhangs over 45o and box can be stacked several high if they are the same dimensions. Make it you own and any size NOW!
Go big with the layers for this one to save time.
For customizer parameters:
tWidth = Total width of box
tLength = Length of box plus front
tHeight = Total height of box
lipHeight = Height of lip at front, no taller than tHeight.
wallThickness = Thickness of walls, 0.8mm (two shells) recommended
columnThickness = Thicker support columns helps when walls are thin, no smaller than wallThickness
lipThickness = Depth of lip arond the brim of the box, helps when walls are thin, best to keep above columnThickness
baseThickness = Thickness of the base of the bin