LCD 12864 Graphic Smart Display Controller Holder for 8020 T-Slot Aluminum Frame

by mcfada Nov 30, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Why are you only using 3 of the 4 case screws in the pictures?

Because I only had three screws handy at the time. I have a fourth now but didn't update pictures.

That makes sense. I just tweaked the design for a 2040 rail setup. I'll post it up here after I print it and ensure its good to go. Thanks for making this.

I'm assuming this can attach to the OpenBuilds V-slot as well?

Depending on the size I guess. If it's 25mm wide (my bolt holes are centered at 12.5mm) then yes. My M6 bolts are 12 mm long, but I suppose you can use any size bolts you want. If Openbuilds pieces are 20mm wide, then this design would still attach but float 2.5mm above the rail, instead of sitting on it. If it was 30mm wide, then my bolt holes would not be centered and it wouldn't fit. I haven't used Open builds except for the wheel rails (which fits my 25mm 8020 extruded pieces) so I think it should work but am not positive. Download the parts into cad and download the open builds parts into cad and see how things line up if you are still concerned.