Skull Fidget Spinner
by MrWai, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Skull Fidget Hand Spinner Toy
Fidget Hand Spinner with Skulls that are made of BrassFill Filament for extra weight and nice shiny finish. (you can print them with any filament it doesn't matter, The weight is mainly from the two nuts in the body)
Extra things you'll need:
The body uses two M8 Hex nuts (13mm) or (1/5 inch) in the US that you can buy from any hardware store or Home depot or from the following links:
And one Skateboard bearing, I won't leave a link for this because you can find it anywhere plus there are different kinds of it. there are cheap ones and expensive ones, ceramic and steel.. etc
Carbon fiber used to cover the bearing caps (if you want to use ones):
Look in print settings part to see the settings I printed mine with.
Note: The Skull design is a modified version from the original design of Wolfiest you can find here:
- Total length: 8.5 cm
- Total width: 3 cm
- Body height without the skulls: 7.6 mm
- Body height with skulls: 12 mm
I can't wait to see what filaments you guys are going to make this design with! Don't forget to upload a picture of what you'll make :)
ZONESTAR Prusa i3
0.2 mm layer height for both the body and the skulls. And 2 shells is enough for walls.
Anything between 20% to 50% or more if you like is fine for the body and 100% infill for the skulls
When printing the skulls make sure to make the first layer a bit higher to get smooth and shiny first layer and to get better adhesion.
After printing the body, put the bearing in its place. You can use a bench vise to press it in place or hammer it gently until its inside.
Put the nuts in place in the same way. (Make sure you use the same type of nuts in the two sides or the weight won't be balanced!).
Put the 4 skulls in their places (2 on each side) by inserting them into the holes on the body to hold in place (you can use a vise to press them tightly).
- Add the bearing caps on both sides of the bearings for better grip.
See images below for steps (sorry for bad pictures my other phone is broken)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Skull Fidget Spinner by MrWai is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving MrWai a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MrWai would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).