Easy Filament Loading Knob
by Seshan, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
You will need 2 M4 50mm hex bolts, I found mine at lowes.
Just print off the two parts, and thread the bottom part onto the bolt, it will be a snug fit. Currently the bottom and top are just friction fit together, you may want to add some glue.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Easy Filament Loading Knob by Seshan is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Seshan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Seshan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).