Control knob for RAMPS LCD Controller
by GoblinAlchemist, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Prusa i3 by MakerFarm comes with a RAMPS Smart LCD Controller which has a clickwheel pin to control it. This is the knob for that pin, easy to rotate and with a "PUSH" inscription to remember that it's a button as well. (Though, should've added a hole for one finger because there is often a need to spin many turns). The inner hole is 0.5 mm wider to account for the slight swelling of printed objects. The source OpenSCAD file allows to customize the knob thickness and number of "ears".
Can be printed without support material, but some infill is required. I recommend to set layer thickness to less than the nozzle diameter (I printed it with the same value and got some artifacts on the bottom conical surface).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Control knob for RAMPS LCD Controller by GoblinAlchemist is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving GoblinAlchemist a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure GoblinAlchemist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).