BichoBot, 3D prited BeetleBot Robot
by brico3d, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a 3D versión of BeetleBot by robomaniac http://www.instructables.com/id/How-to-Build-a-Robot-The-BeetleBot-v2-Revisite/
Prusa i3 Hephestos
For the 3d impression of the lower support, the antennas, the "feet" and the support of the motors, it is not necessary to print with quality, to activate supports or to put raft. However for the case, I recommend defining supports in Zigzag to 5% minimum and a 6mm raft to ensure a good impression.
To improve the slip of BichoBot, I recommend putting heat shrink around the "feet" and a piece of felt in the back as seen in the image.
For more fun, you can print several diameters of "feet" and go testing, with larger diameters get a higher speed and if you swap between feet, you can get circular trajectories.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
BichoBot, 3D prited BeetleBot Robot by brico3d is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving brico3d a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure brico3d would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).