Model for the Mushroom Mod - Open Source 26650, 20700 & 18650 Splitted Version
The 20700 is only expirementel, it should fit though....
There are different Caps for different 510 Connections, one for the FDV 510 like in the datasheet and the other for the Modmaker 510 Connection with build in support.
This Files are more suitable for FDM Machines, less Support needed.
But the Cap has to be glued on the Body.
I used succesfull Cyanoacrylate Glue in German "Sekundenkleber", it slitly dissolved the surface of my Colorfabb PLA/PHA blend.
I also glued Colorfabb XT together but the results weren´t as good as with the PLA/PHA blend. For the XT Box i used UHU Repair Extreme and it did a better job than the Acrylic glue. So no garanty for an other Material as Colorfabb PLA/PHA.
If you succesfully tested other combination, fell free to post in the comments.
The Objects are orieted as the should be printed.
Please let me know throug the comments how you printed it (Machine, Settings etc...)
And it would be great to see your Object through the "Makes" Section
Support only for the FDV Top and the Button hole...