Parrot Ar drone 808 #18 anti vibration camera mount
by foster182, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Very simple mount design for an 808 keychain camera to be used with a ar drone 2.0 but could be modified and used on other devices.
Needs 4 small rubber bands to loop in the holes and around the outer pins.
The cut outs on the lid are to add extra rubber bands to hold the 808 camera in place. Not shown in picture.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Parrot Ar drone 808 #18 anti vibration camera mount by foster182 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving foster182 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure foster182 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).