Loading
Bosnianbill

Dremel Tool Bit Organizer

by Bosnianbill Dec 7, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

2.8 layer height. Cura has it at 13 hours print time. I'll actually run it next week and see.

Using Flashforge software that comes with the Finder & Guider II, Took mins to slice & 6 Hrs to print.

I have no idea what computers others are using but Simplify 3D took 2 seconds to slice the file. It will take my FLSun Cube 3d 6 hours to print. But slicing it shouldn't take long. I have an I5 with 32 GB of Ram and 2TB of Cache.

2018 and still one of the best out there.. Tnx !!

Do Dremel bits have the same shank diameter as Dental Lab Handpiece bits?

You have a serious bit collection!

I can't get this STL file to work. My slicing keeps freezing at 65%. I am using Maker-wares latest build of their software.

one thing I would suggest, would be to reduce the number of sides that comprise the polygon that represents the round holes.

it looks like each small holes have 48 sided polygon.

for this purpose and size holes, 6 sided holes should be sufficient.

which should reduce the size of the mesh file, and make it easier and faster for the slicers.

I'm not certain what setup you guys have, but I managed to slice and export the g-code in about 3 minutes using an old Q8300. I have a feeling you should check your slicer settings or reinstall your slicer.

JaredTS486,
No idea what hardware you have, but my i7 took several hours to slice this, probably due to the complexity that all the holes add to the model. Just be a bit patient, let it run and it'll compile.

Agreed. It took at least 5 hours to slice on my MacBook Pro. Just wait til it prints...13m of filament. This is my largest print so far!