2.2 Beadloc wheels to fit standard r/c rock crawler tires on MrCrankyfane's V3 printed RC truck. I have included offsets from 0 to -11 and a two piece wheel center. I have only printer the -2(front) and -7.5(rear). The -2 wheels are matched to the inside clearance depth of the original wheels, and the -7.5 on the rear line up nicely with those on the single tire rear axle.
Each wheel requires a Main Body, Outer Body, Clamp Ring, and 6 small screws (M2.5x6 or so). The 2pc needs a Main Body A and B, and has slightly different outer and ring parts.
Source files now available:
2 Pc http://a360.co/2jtfsDe
Only the single piece Main Bodies needs Support.
The Main Body and Outer Body should fit together tightly.
I used some M2.5 screws I had laying around to screw the clamp ring down, but the holes are smaller and can be drilled to size.
The 2pc Main Body needs to be glued or welded together.