3D printable storage container that prints with cover and box with hinge in the same print!
It's also stackable, both filled and empty.
Item is quite challenging to print at the hinge section so make sure you got your settings dialed in before attempting this print!
Box is approximately 60x60x60 with sides tapered.
Holding volume is approximately 150cm^3.
[POST PRINT PROCESS]
All that's required to do is to print it and remove the built in support of the cover, and you're done!
If you find that the item improve your daily life, consider supporting the designer by sending a tip.
Click "TIP DESIGNER" here.
Print this part with 0% infill, and ~1.2mm bottom/top and ~1.2mm walls.
I was looking to make a box to store small things in for electronics and couldnt find any I liked, so I decided to make my own, and make it quite challenging to model.
I went with a fully 1 part printable storage box that's stackable.
Both the box and the cover with hinge is printable all in ones and no assembly required.