by Shoyun, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A simple chest locker system :)
Screws holes are Ø4mm
Padlock hole is Ø5mm
Edit 30 december 2016:
V2 added for a better rotating movement once screwed in the chest (the rear part was rubing wood a little at the opening)
Supports are usefull for the part 1 only. Once printed, gently try to move the rotating part and it should move freely. If not, help it with a cutter.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Chest Locker by Shoyun is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Shoyun a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Shoyun would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).