THIS IS VERSION 2.0 OF THE MEW & MEWTWO PIECES
These pieces can be used as either the Kings or Queens in the Pokemon Chess set from roshandp1. If you like playing Mew and Mewtwo as the strongest pieces in the game, I recommend playing them as the Queens and your Pikachu as your King.
New additions from Update #1 were causing failures in the mesh, with openings and missing sections when put through slicer. Models have been upgraded so that the entire model slices properly without any errors, and the Mewtwo top piece limbs were made slightly larger so they are more successfully 3D printed.
- 3D printability improvements on the base of the chess piece where Mew/Mewtwo are 'standing'. The ledge was originally was not made for 3D printing and the part quality suffered. These updates have improved the pieces dramatically.
- Mewtwo's built-in support for his tail has been made smaller and easier to remove without breaking his tail
I needed a pair of Pokemon Kings that could be made on my Da Vinci Pro 3-in-1 (and Prusa i3 MK2)
This is a remixed set of Kings for the Pokemon Chess set from roshandp1, based on models from hairald(Low poly Mew), Tan_Tata_Chan(Mewtwo V.2), all based on the original OpenSCAD Chess by Tim Edwards
I put together a blog post about making the full Pokemon Chess set - check it out:
We also made a multicolor version of the chess set "Pokemon Stadium" style that we also wrote a blog about here:
Bring you ideas into reality - today! Order your 3D print from AG3D on 3DHubs today:
Original models have been replaced and updated to be 3D printed easier with less post processing work. Still working on making it as 3D printable as possible (suggestions welcome)
It's not easy to remove the support from the Mewtwo tail, you might break the end of the tail off! Still a work in progress. If you have any ideas let me know - looking to make this better and better.
Combined STL models
I used 123D Design to combine and manipulate the STL models together. Meshmixer was used to adjust mesh and make sure any updates made through 123D Design do not fail when going through slicer for 3D printing