The widest part measurement is about 23cm, make sure your printable area fit.
It will take 50~60 hours to print all parts using 0.2mm resolution..
Soft material is recommended for rubber parts, or you can cut from any rubber strip on hand.
You have to tap the screw thread 8mmx1.25 for precision consideration.
Stainless 8mmx1.25 14mm screws are recommended for strength consideration, you will need 8 of them.
Print 2 Belt pins for goggle nylon belt no wider than 4cm with maximum thickness 3mm.
2 bolts thru the EV front panel are strongly recommended for safety consideration if you will ride with it.
More from Construction Toys
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving philxing a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.