LARGE Destiny Ghost - Back Switch Plate
by bLITzJoN, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I wanted to add a switch to the back of the Ghost to make it easier to turn on/off for my daughter. Rather than use the back on the model, I printed two fronts and designed a plate to hold a switch in the back.
I included a mirrored front to make the assembly a little easier for the guts which is something I wish I had done so the light could remain in the middle of the ghost and not shoved to either hemisphere.
Disassemble the back of the light by removing the battery clip.
Drill a hole in the back cover for the wires.
With side cutters clip off the touch points on the battery holder. Solder a wire to the back and to the touch plate on the light board.
Assemble everything together. Twist on the cap enough to keep the light together. When you put the two halves of the Ghost together, DON'T glue them so you can change the batteries.
Does it work???
How I Designed This
In case you need to modify for your switch, https://tinkercad.com/things/idZp3bFtMlG
Select a service to print this Thing and ship it to you
LARGE Destiny Ghost - Back Switch Plate by bLITzJoN is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving bLITzJoN a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure bLITzJoN would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).