Airblade X Canopy
by drewprice, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The AirbladeX X-Racer 130 is a wonderful 130 class FPV quad. The canopy section just felt too bulky for me. I wanted something light weight, very simple and to the point.
I have two AirBlade X quads, you can read about my setup here: http://tenfpv.com/blog/?page_id=168
Anyways the canopy provides nearly no protection, the cameras are pretty well exposed but I have yet to break either. The Antenna mounts to the rear behind the standoff. I print in TPU so that it can bend and protect the camera.
Two versions available XAT520 camera at 20 degrees, RunCam Owl version at 35 degrees. More may be available later.
With the runcam owl you need to remove the lens, place the camera in the canopy then add the lens (adjust it).
Prusa i3 Clone
Printed with TPU. I used support to get a cleaner "ring" that holds the camera in.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Airblade X Canopy by drewprice is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving drewprice a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure drewprice would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).