Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
Google Play
and the Apple App Store.
¡Cojonudo! Funciona genial
Perfetto, una volta posto con la facciata della ventola sul piano ho subito iniziato a stampare ed il lavoro è venuto perfetto
Should I turn it over?
Yes, the spacers in contact with the heating bed.
A que grosor y cantidad de relleno me aconsejáis imprimirlo ? a 0.2 y 40% esta bien?
Perdona por tardar en contestar, yo lo hice a 0.2 y 75%. Pero supongo que también estará bien con ese relleno.
Sencillo y funcional, justo lo que necesitaba, mis cables de alimentación tienen 117ºC. Gracias por el aporte!!!
Gracias!!!
I load it on Cura..and is it only X 10 mm Y 9.5 mm Z 3mm :-(
It must be some error when exporting to STL, put a scale factor 1000% in Cura. Measurements are 100mm 95mm 30mm.
Thanks for your quick answer with sack factor 1000% it worked
Greetings Kiss1