Loading
bmichels

Lack Table Spool Holder

by bmichels Dec 29, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

After about a year using this holder, I figured out I was getting a slight underextrusion from the spool not spinning smoothly on this holder. For now, I've printed a different holder (https://www.thingiverse.com/thing:1001312) and things have improved. You'd think with bearings, it would run smoothly, but mine doesn't. I actually have friction marks on 2 wheels where the spool slides on the wheel instead of the bearing turning.

Does anyone else that is using this design have or had this problem?

The Universal Spool Holder - Main Page

Oh good, was on the other print. Never mind. Thanks

Hi, I am printing this now but looks like there is another part missing besides the wheels which I found them on the previous print. The two sliding parts (outer pieces) the bases but the inner part that locks the wheels in place is not there. There should be 3 parts but only 2 in the download.

Would you mind supplying the cad files? I would like to make a ptfe guide part that fits on the rail that has a 4mm hole going down to 2mm so that a ptfe tube 4mm OD 2mm ID can be held firm at the rail. I have made this but the profile of the rail is not quite a match.

https://cad.onshape.com/documents/c1eb7cf4e8eeb18243f25a25/w/eedf02efec536fdf3d717c77/e/ab55885b9fa2660b53335f59

I used FreeCAD to make this remix. Just now uploaded the files. Took me a while to track them down.

this is a remix from what? i don't find the wheels...

where did you find the wheel stl at?

This is a remix. I didn't change the lock part or the wheel part.

Wheel is not included in the download which is why I believe he is asking.
I had to download the original to get that also.