This LCM 3 is based on m-bergman`s 1:200 LCM 3, scaled to 1:16 and made wider for fitting a 1:16 Tiger I.
I have also added under part of the hull and space for rudder and propeller. I still need to make engine and servo mounts.
Parts are made so they fit beds 200 x 200 x 150mm. It is a huge model nearly 94 cm long and 36 cm wide.
311216: Just added propellers (Prop L and Prop R)
060117: Just added 5 new parts for motor and transmission. The 2 pic LCM3 6 and LCM3 7 shows how put the things together. Motors for the projekt is Igarashi SP3657-50 or similar. Sharft diameter is 4mm and the brass tube is 8mm with inner diameter 7mm. You need about 180mm tube.
Just another add. This time rudder (print 2) and rudder servo mount. This is made to fit a HobbyKing HK15139 servo.
You need a 4mmØ rudder axis and 2 (3mmØ 25mm L) axis to put thru rudder axis and rudder.
100117: Added Oerlikon 20mm AA-gun made from a model on Grabcad but due to printing ability I made a simpler model.
130117: Just added version 2 of the two gearwhells. Version 1 has wrong hole diameter.