Loading
SIMKEH

Anet A8 bed level test

by SIMKEH Dec 30, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Worked good on my JG Aurora A3. I scaled X,Y to 90% (I didn't want it to print right to the edge) and Z to 120% (for fun) in Cura before printing.

This was a life saver today! Thank you!!

This failed for me, it started printing off the hotbed unfortunately and Cura 2.7 can't slice the STL file.

Thanks for sharing this. I had been thinking about creating something similar, and with this I feel like I was finally able to get my bed mostly level.

Hi. Thanks for sharing. What settings in your slicer do you use? Cura doesn't output any GCODE to print the lines. It just ignores them (too thin?). Would be great if you could help me out here.
Maybe providing the .gcode file right away would be an idea, as you are specifying it's for the A8 anyhow.
Thanks, Phil

Is the gcode supposed to heat to 240?

Hi, i printed in .2 mm with s3d. i uploaded gcode file.