Batman fidget spinner toy [EU, US, UK coins]
by ford_, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I slightly modified the Batman Fidget Spinner Toy by heraldomedeiros to have it take european 5 eurocent coins.
The Gear Bearing by emmett has been scaled down with attention to the space between the internal gears so that after some fidgeting it's still functional when printed so small. Additionally, the central hole has been enlarged to accomodate two caps used to hold the toy with your fingers.
Since the bearing is completely 3D printed it will not be as smooth as a metal one that you could normally buy but with a few minutes of fidgeting it gets pretty close.
To keep everything in place all I used was some glue on the bearing caps (not absolutely necessary though). The bearing doesn't need any glue to fit and stay in the center of the batman symbol.
I printed everything in fluorescent PLA at 15% infill with the top 8 and bottom 8 layers set to full. (You have to enable these last two options manually in Cura)
EDIT: added UK penny and US penny versions.
EDIT2: use this Simple Bearing 22mm instead of the one included as it runs more smoothly.
Anet A8 (Prusa i3 clone)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Batman fidget spinner toy [EU, US, UK coins] by ford_ is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ford_ a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ford_ would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).