Star Wars Logo
by jcarolinares, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
After the FPGA Wars alternative design: http://www.thingiverse.com/thing:1987537 some people ask me for the original Star Wars design.
This design is formed by two divided pieces. Perfect for geek's houses!
You will need black and yellow filament (or just use acrylic paint). I used the "stop at height" Cura plugin to change the filament to yellow. With the original file I reccomend to stop at height 27 mm (with a total height of 30 mm)
The result in my opinion is very cool, hope you like it!
Prusa i3 bq Hephestos
You will need black and yellow filament (or just use acrylic paint). I used the "stop at height" Cura plugin to change the filament to yellow. With the original file I reccomend to stop at height 37 mm (with a total height of 40 mm)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Star Wars Logo by jcarolinares is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving jcarolinares a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jcarolinares would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).