by _primoz_, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
UPDATE #2: I made about 3 times bigger version. It has a lot of hair and they are also very long.
Watch Joel Telling's (3D Printing Nerd) video about it: https://youtu.be/OTXPU2P-ElE
UPDATE #1: I made 50% smaller version. It should only take about 1-2 hours to print. But you must be much more careful when cutting the hair. This model has much less hair, so if you break or pull out too much hair, there will be visible bald spots.
The hair is connected to sacrificial wall, which is removed afterwards.
(See picture: post_processing.jpg) You can also try hot water to form the hair. Anyway, be careful not to burn yourself.
There was a request to add a brim to sacrificial wall. So I made it: "Hairy_Lion_with_brim.STL"
This was printed with ABS, but it should also work with other materials. If you are having problems, adjust bridging settings in your slicer.
You can find dual extrusion version here: http://www.thingiverse.com/thing:2050208
This is only for 0.2 mm layer height.
Tools & Utilities Apps
Repair, slice, or enhance this Thing
Hairy Lion by _primoz_ is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving _primoz_ a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure _primoz_ would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).