PSU Cover + Switch
by rmoro, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a remix of thing:527334. I wanted the part that houses the inlet module to have nuts for a firm and durable mount. The screws on the side of my 24 volt PSU are 2 mm closer to each other, so that was another thing I changed. Use support material to print the inlet module. Both nuts have a tight fit. Get them in place by screwing in a bolt first, without the inlet part. They won't fall out once in place. About the PSU cover: I did not modify (or use) that part.
Tools & Utilities Apps
Repair, slice, or enhance this Thing
PSU Cover + Switch by rmoro is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving rmoro a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure rmoro would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).