There are several versions of the realacc x210 pod.
It is for the old version.
I am thinking of making a pro version.
That version will have as base the geprc version.
For now I keep the existing ones and I have added 4 new versions all 4 with the step files.
In the stl version are all the holes for the matek pdb, rear opening for power wires and the sides open for the fc. The step files will have no holes so you can ad your own holes in it.
The 4 versions are with 20, 30, 40 cam mount and no cam mount.
In this last version there are some small changes.
The pod is lighter.
The vtx antenna mount is moved further to the back to give more space for the pigtail 90 degree and straight.
The front is a bit longer to protect the fpv cam better.
The mount four the fpv cam is a bit wider from 27.5 to 28mm, made it easier to mount a hs1177 and a runcam swift.
Lens hole is 17mm but as you use flex material what is best for the pod, the gopro lens will fit.
Improved the area under the fpv mount so it is a bit thicker.
Changed the way to mount the pod to the frame. I added opening so you can slide in a M3 nut that is 3mm high. The normal m3 and the nylon nuts will fit. This will make it better to mount the pod.
Names of the new versions are pod, pod 20, pod 30 and pod 40.
I hope that the new versions and the step files help to make changes and that everything fits better.