OpenFlywheelProject Rayven Cage
by NerfOFP, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an opensource flywheel cage created for the Nerf Rayven.
It has been tested in both.
There are four versions of this cage poster here, for highest performance print the 41.5 mm cage. Each cage larger has decreasing performance related to the gap distance listed in the file name.
For high crush systems such as the 41.5 mm and 42 mm cages, motors with very high torque ratings are required.
You can use rafts if you want, However it will require considerably more post processing that way.
This can be printed in PLA, but due to the high heat generated by the motors, it is best to print in ABS or PETG.
Open Flywheel Project products are not toys. Open Flywheel Project products are high performance blaster parts which should never be used without eye protection, or shot at or near anyone not wearing eye protection. They greatly increase the power of the blaster and should not be used by or with children. Open Flywheel Project takes no responsibility for injuries or property damage resulting from the use of our products. Open Flywheel Project has no relationship with the manufacturer of any blasters our products are designed for.
How I Designed This
Designed in Solidworks
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
OpenFlywheelProject Rayven Cage by NerfOFP is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving NerfOFP a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure NerfOFP would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).