Visit my blog for more pictures: http://www.afdhalatifftan.com/

Summary:
-I printed this in Excelvan Coffee and Red ABS filaments
-I use E3D Volcano (clone) to speed up print time, so, each part takes less than 90 minutes to print.
-Designed in 123D Design.
-The box was intended to be mounted on top of the bike frame.
-Able to hold three 4S 8000mAh lipo and ten 18650 cells.
-Took almost 1kg of ABS plastic
-Parts are glued using acetone and super glue (parts named bracket)
-Printer used was Wanhao Duplicator i3 aka Di3
-Connections made by using XT60 and XT90 connectors
-DB25 was used as balancing port
-The box is secured in XYZ-axis
-The Z-axis was secured using Nut Job: http://www.thingiverse.com/thing:193647