The idea of this project was to generate a payload bridge for the DJI Phantom 4 - and new now also for the Phantom 4 Pro- that can carry any device, such as lights, cameras or 360 cameras (what I built it for).
Download the fitting STL File - The DJI_Phantom_4_Payload_Bridge.stl is only for the Phantom 4, the Payloadbridge_Phantom_4_Pro.stl is only for the Phantom 4 Pro.
For mounting cameras - to avoid the yellow effect - a damper is required between the camera mount and the payload bridge. Additionally, I recommend to secure the camera mount with the bride with 2 cable binders through the central hole.
Attention: Flying with payload changes the flying behavior of your Phantom 4. Avoid windy conditions when flying with payload. Also avoid fast movements. Plan for longer descent times. Always fly carefully.
Overloading your Phantom can lead to overheating the engines and fast battery drain.
Using these designs the pilot carries the full risk for all potential damages. The designer can not be held accountable for any damage caused by the usage of these designs.
More from R/C Vehicles
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving bgill a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.