THE tool I wished I made a long time ago! I really love it.
A lifetime tool that works pretty well.
Make a perfect trim in seconds.
Very stable, especially on starting.
Reverse the blade when dulled.
Up to 4mm thick banding.
2x DIN912 M3x20mm
2x Brass inserts M3 OD4.3mm height <6mm (I used 4mm)
1x Standard Utility Knife Blade
If you use hardwood as banding material, you will probably need both a left hand and a right hand version. To get the left hand, just mirror the parts on your slicer program.
Yes, the higher the better (think lifetime tool)
The needed supports are included on the model (on the clamp basicaly).
The body is meant to be printed standing up, and top side of the clamp laying on the bed.
Just break and remove the supports on the clamp part.
161mm utility knife blade
2M4 bronze inserts (64mm)