this started as a remix, but i ended up retooling the whole design.
for mounting there is only one screw hole for things to mount to.
i ended up placing this a bit higher on the power supply and drilled holes.
for this i took my power supply apart, and took the board out as to not have metal shavings left on it to cause a short. then once the holes were made i reassembled it.
(DO THIS AT YOUR OWN RISK)
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.