R55 Handbrake cap
by AdamLWolf, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Handbrake cap for an R55 (Clubman) MINI Cooper. Will most likely fit any Gen 2 MINI, still needs a little work, but works fine for now.
How I Designed This
123D Designer and a camera
This is a freeform re-model of the handbrake cap for an R55 (Clubman) MINI Cooper. In all actuality, will most likely fit any 2nd gen MINI, but haven't tried yet. It fits loose, so I may edit and make the clips .5 - 1 MM shorter. I have already broken one of the clips on this version, and will be tweaking the reinforcements.
I designed this by taking top / front / side photos of our broken one, looking at a non-broken one online for the clips, and a (good) bit of trial and error. AutoCAD 123D Designer was used. Source and STL are both included. Please re-mix and help me fix!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
R55 Handbrake cap by AdamLWolf is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving AdamLWolf a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure AdamLWolf would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).