Makerfarm prusa i3 3mm glas bed holder(updated!!)

by Gizmo999 Dec 13, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

I like the look of this clip for the heatbed, I use 1/4" borosilicate glass could you create a clip with 1/4" glass inner dimensions for the clip to hold on to please? I see you just gave the .stl files so its very difficult to modify the design to get what I need. I am sure this would help a lot of people.

Thanks in advance!

sorry mate for the late reply...i put the skp file with it .

I am finding it nigh impossible to print the updated version. The addition of the mouse ears to prevent warping has lifted the rest of the clamp body one layer above the work surface, so the filament does not get a good adhesion, and gets pulled off by the nozzle very easily. I have make 3 attempts so far, and haven't gotten past the second layer of the clamp body yet.

Why "Clamb"? Is that a name?

Either for Clamb shell, which it kind of is, or maybe English is a 2nd language and intended Clamp.

Going to try it right away ^^ looks alot better then those clips !
I just hope the glass wont move during opperation,

the glas bed needs to be wide enough ,the best is a piece of glas 21x21 cm and cutof the corners,i only did it on the left side and there it holds best.

I just printed one in ABS, (It warped a little but use able, Gotta get a heat chamber asap ^^)
Works great! Very snug,

It seems like only 1 will even do the trick!
I will make 2 tho, But i guess it might go to lose over a few months.
But ye i will keep my clamps if that ever happens, and i can print some new ones then !

Its alot cleaner, i used to have a problem with mine when making bigger prints. this should resolve that!

Thanks, Now i am like, why didnt i think about it! ^^

i dont understand i did tag it ??? as makerfarm

Well try searching Makerfarm, You can't find it through that

yes but on my mobile app it does... strange