Hi, i would like to show you my ice racer. I used my old rc parts. It is very cheap and easy
to build so i really recommend it.
Youtube video here and below.
Parts which i used:
3 plsatic bottles
Approximately 3m 6x10mm lumber
3d printed parts
2450 kv 2212 motor
8 inch prop
~ 20 grams servo
3,5 and 6 mm rod
Motor should be slower and prop and ESC should be bigger but i had this parts and they working so
i leave it as it is. Steering mechanism could be better too but it is fairly good.
Build it remix it and have fun :)