Polycarbonate Tiko Build Plate
by walter, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
While Tiko build plate works well, I like having multiple build plates and don't like printing with rafts.
These rings help keep the Tiko from shifting when placed on a glass or polycarbonate sheet, and act as a template for cutting the sheet. Just glue the ring on a sheet of polycarbonate, then trim the edges with a 3d printed router table.
I used 1/8" polycarbonate (these were left over from my RigidBot), but thinner sheets would be cheaper and probably would work just as well. The sheets should be about 10" square or larger.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Polycarbonate Tiko Build Plate by walter is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving walter a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure walter would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).